Syndicate content

(NEW) DEL OZONE MCD-50 OZONATOR HIGH OUTPUT 110V

$129.00

Del Ozone MCD-50 Ozonator High-Output for Spas up to 1,500 Gallons, 110V (Includes Parts Bag)

We Stock Ozonators with Amp, J & J Mini and Gecko Aeware Plug Style for use with Gecko Aeware control systems. choose your plug style at checkout. If hard-wiring, the easiest plug to remove is the Amp Plug.

The Del Ozone MCD-50, in combination with complete injection, mixing, degas, and destruct options, represents DELs advancements in ozone technology for spas; achieving the perfect balance between ozone efficacy and safety. The MCD-50 Ozonator easily repairable and usually will run for 4 or 5 years before Renewal Kit is needed.

Del Ozone MCD-50 Output:
50 Milligrams per hour at 580 PPM

How Is Ozone Created?
Oxygen molecules are split, by a high-energy electrical discharge, resulting in two individual oxygen atoms and those individual oxygen atoms unite with remaining oxygen molecules to produce a three-atom molecule of ozone.
The weak bond holding ozones third oxygen atom causes the molecule to be extremely unstable and thus, very effective as an oxidizer.
An oxidation reaction occurs upon any collision between an ozone molecule and an organic molecule, such as bacteria, viruses, fungus and algae, where the oxygen atom held by the weak bond splits off and only oxygen is left behind.

The MCD-50 Parts Bag Includes: (4) hose clamps (PN 2-0078); 2 screws (PN 2-0278) ; 1 screw (PN 2-0618); 1 installation & operations manual (PN 4-1123-01); 5' of tubing (PN 7-0075); and 1 ozone check valve (PN 7-1140-01).

 

 

The MCD-50 Parts Bag Includes: (4) hose clamps (PN 2-0078); 2 screws (PN 2-0278) ; 1 screw (PN 2-0618); 1 installation & operations manual (PN 4-1123-01); 5' of tubing (PN 7-0075); and 1 ozone check valve (PN 7-1140-01). An oxidation reaction occurs upon any collision between an ozone molecule and an organic molecule, such as bacteria, viruses, fungus and algae, where the oxygen atom held by the weak bond splits off and only oxygen is left behind.The weak bond holding ozones third oxygen atom causes the molecule to be extremely unstable and thus, very effective as an oxidizer.Oxygen molecules are split, by a high-energy electrical discharge, resulting in two individual oxygen atoms and those individual oxygen atoms unite with remaining oxygen molecules to produce a three-atom molecule of ozone.How Is Ozone Created?50 Milligrams per hour at 580 PPMDel Ozone MCD-50 Output:The Del Ozone MCD-50, in combination with complete injection, mixing, degas, and destruct options, represents DELs advancements in ozone technology for spas; achieving the perfect balance between ozone efficacy and safety. The MCD-50 Ozonator easily repairable and usually will run for 4 or 5 years before Renewal Kit is needed. We Stock Ozonators with Amp, J & J Mini and Gecko Aeware Plug Style for use with Gecko Aeware control systems. choose your plug style at checkout. If hard-wiring, the easiest plug to remove is the Amp Plug. Del Ozone MCD-50 Ozonator High-Output for Spas up to 1,500 Gallons, 110V (Includes Parts Bag)

$129.00

(New) HotSprings Spa Filter

$35.00

Clarathon Premium Ultra Filters are the most effective and durable pool and hot tub spa filter cartridges available. In fact, you cannot buy a better quality filter at any price. Save even more with our generous quantity discounts! When you change your spa water, always rotate the soiled filter out with a clean, dry spare. The result is longer filter life and no waiting.

$35.00

(New) Watkins GFCI, 20Amp / 115/120 Volt Plug

$49.99

 Leviton GFCI, 20Amp / 115/120 Volt: Hot Spring, Tiger River & Solana
20 AMP, 115 Volt GFCI. The GFCI serves an important purpose in any electrical circuit. It provides protection against current leakage to ground, which can cause an electrical shock or in extreme cases, death. For this reason GFCI’s must always be properly installed and never be removed our altered. A Class A GFCI, which is attached to the spa's power cord, protects 115 Vac spas.

Includes GFCI (no cord). Use on all HotSpring, Tiger River, and HotSpot (sorrento) 115 Volt, 20 AMP spas. If you need the cord, we list this in our store as well -- the GFCI & Power Cord Combo
70996 Watkins

$49.99

Chemicial Kit

$99.00

Chemical Kits

Everything you need to get started with your spa.

$99.00

Cover Lift (used)

$75.00

Fits 3' to 8' wide Spa's

The CoverMate 1 is the world’s most popular topside-mount spa cover lift! Why? Because it's so easy to install, and even easier to use! Features a sleek, elegant look to complement any hot tub.

The black powder coated, rust-free finish is baked-on and resists all weather conditions. The top quality construction includes non-corrosive composite mounting brackets. This cover lifter has a very well engineered 12-point, 14 inch mounting system for ultimate strength. Features rubber corner grips. MSRP: $229.95

$75.00

GFCI Breaker

$299.00

These "mini breaker boxes" accompanied all new Hot Spring, Tiger River & Hot Spot spa models.
If your spa is wired 220volt then you'll need the correct sub panel with the GFCI breaker(s). This is to comply with your spa manufacturer's UL Listing. To pass inspection with your local building department and to be covered by your homeowners insurance, one of these sub panels has to be wired in-line between your main electrical service (meter) and your spa.

$299.00

Hot Spring Spas Freshwater AG+ Continuous Silver Ion Sanitizer

$35.00

Hot Spring Spas Freshwater AG+ Continuous Silver Ion Sanitizer will give you brilliantly clear, odor free spa water

Nature 2 Mineral Sanitizer for spas
Reduces potential for unpleasant odor and scum lines
Enhanced bather comfort Installs in seconds - right into your spa filter
Comes in two parts - the main body and the handle
Relax while it consistently and conveniently sanitizes your water
Change every 4 months Specifically designed to use with HotSpring Tiger River, Hot Spot and Solana spas
Compatible with the Freshwater III ozone systems
Not for use with Bromine"x99" Insulated Cover (used)

$35.00

Test Kits/Strips

$15.00

AquaChek® White - Salt Tests for Sodium Chloride with advanced precision AquaChek White is a unique test strip that simplifies an otherwise complicated testing operation. Unlike other test kits, the AquaChek White strips will give you a specific reading of the salt level in your water. A proper level of salt will ensure that the generator is able to produce the desired amount of chlorine and keep the water free of contaminants. From a small water sample, this strip allows consumers and pool professionals to measure levels of sodium chloride (salt) with the highest precision in three to four minutes. Easy and accurate, the AquaChek White test strip measures salt levels from 400-7000 ppm. Comes with complete instructions. 10 strips per bottle. AquaChek Salt has added directions in 15 Languages to the product insert! English, French, Spanish, Italian, Czech, Danish, Dutch, German, Greek, Hungarian, Polish, Portuguese, Russian, Swedish and Turkish.

$15.00