Syndicate content

Spa Light

$35.00

The Savi 24 LED Light Bulb is a color-changing LED light engineered exclusively for portable spas and hot tubs. With a rated lifespan of 100,000 hours, the Savi 24 will maintain an impressive splash of color for over a decade, requiring virtually no upkeep for total self-sufficiency. Equipped with 10 lighting effects, it operates as a 12V wedge-base light bulb socket replacement.

$35.00

Blower

$75.00

Millenium hot tub blowers
(manufactured by CG Air)
Manf. # ME-750-120-60 Identical to ME-120/60 and 045-6111
120V/60Hz
36in. cord w/amp plug
Description
Adaptability: The Millenium is small and light
Tranquility: The Millenium motor rubber mounts absorb 95%
of the motor vibration
Performance: Twice as powerful as a conventional blower
Memory: The Millenium blower can use a wide variety of air
or electronic controls
Quietness: The silencer integrated on the Millenium reduces
noise to a minimum
4 pin amp 36in. cord
This blower works on all pipe sizes from 1in. to 2in. pvc. Due to
it’s internal design standard replacement air blower motors should
not be used on this Millenium Blower.

$75.00

Heating Element

$75.00

Spa Heater Element 4.0 kW 240 volt. Fits most Flo-thru hot tub heaters. Incoloy 800 sheath provides superior corrosion resistance, along with epoxy potting top and bottom for the ultimate in protection. Features large O-Rings for sealing on imperfect surfaces, such as found in replacement applications. Features very easy to install dimensions, for difficult style housings. 9.9 inch overall length. 624402 with an added bend at tip for extra clearance in heater housings where element is in close proximity to pressure switch threads. Shown with 2 SS clips, and is packaged in bulk. 240V 4000W SPACOMP 04 Spa Heating Element by Spa Components. Available individually boxed. fits B24040 heaters and many others

$75.00

Wet End

$59.00

This is the wet end portion of a 3 HP Hi-Flo spa and AG pump. This is basically a pump without a motor.

This wet end is used with a 3 HP, 48Y frame, thru-bolt style motor. The motor used may be either a single speed or a two speed. The wet end may be rotated 90 degrees to change the discharge position.

The inlet and outlet are standard 2" buttress threads. See below for exact dimensions. This has a center inlet and side discharge

$59.00

Pump Gasket

$10.00
$10.00

73790-PDR Titanium Heater, 1.5kW/6kW (Factory Upgrade Replacement)

$309.00

This 2011 No-Fault PDR Titanium Heater is the newest factory upgrade replacement heater from the makers of Hot Springs spas. Its double-pass sleek design replaces all previously discontinued heater styles. The double-pass feature efficiently heats the water in two stages and oh what a perfect job it does! Now factory approved and warrantied for all 115 volt 1.5kW and 230 volt - 6kW installations for all 1995-now Hot Springs spas, Tiger River spas and Limelight spa models. Your existing 3/4" vinyl tubing will attach to this heater with no worries. The thermistors have different thread sizes to insure they can't accidentally be reversed when re-installing them into this new PDR heater. The also have different tips on the ends of the wire to insure they can't accidentally be plugged into the wrong port on the IQ Control Box.

This replacement heater doesn't have a plug on the end of the power cord like on the 1995-1996 spas. In most applications, the heater is connected directly inside the spas control box. If your existing heater plugs in to the bottom of your control box, you may need the appropriate adapter. Adapters are listed next to your spa model on the chart below.

Tip: You can also utilize the cord end (plug) from your old No Fault heater and splice it onto this new PDR if needed.
 

$309.00